Download Print this page

Yealink SIP-T54S Administrator's Manual page 354

Sip-t2 series; sip-t4 series; sip-t5 series
Hide thumbs Also See for SIP-T54S:

Advertisement

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Description:
Configures the emergency number to use on your IP phone so a caller can contact
emergency services in the local area when required.
Default:
When X = 1, the default value is 911;
When X = 2-255, the default value is Blank.
Web User Interface:
None
Phone User Interface:
None
dialplan.emergency.X.server_priority
(X ranges from 1 to 255)
Description:
Configures the priority for the emergency servers to be used.
The digits are separated by commas. The servers to be used in the order listed (left to right).
The IP phone tries to send the INVITE request to the emergency server with higher priority.
If the emergency server with higher priority does not respond correctly to the INVITE, then
the phone tries to make the call using the emergency server with lower priority, and so
forth. The IP phone tries to send the INVITE request to each emergency server for three
times.
Example:
dialplan.emergency.1.server_priority = 2, 1, 3
It means the IP phone sends the INVITE request to the emergency server 2 first. If the
emergency server 2 does not respond correctly to the INVITE, then tries to make the call
using the emergency server 1. If the emergency server 1 does not respond correctly to the
INVITE, then tries to make the call using the emergency server 3. The IP phone tries to send
the INVITE request to each emergency server for three times.
Note: If the IP address of the emergency server with higher priority has not been
configured, the emergency server with lower priority will be used. If the account is
registered successfully or failed (the account information has been configured), the
emergency calls will be dialed using the following priority: SIP server>emergency server; if
the account is not registered, the emergency server will be used.
Web User Interface:
None
Phone User Interface:
None
328
Parameters
Permitted Values
a combination of digits 1,
2 and 3
Default
1, 2, 3

Hide quick links:

Advertisement

loading