Yealink SIP-T54S Administrator's Manual page 818

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Macro Action
$K<key name>$
792
Description
phone or there is no matched soft key on the current
screen, the execution of the action string will be ignored.
The softkey ID is case-insensitive.
Example: $Sanswer$ means pressing the Answer soft
key.
Yealink IP phones support customizing soft keys. When
invoking a custom soft key, the prefix "#" must be added.
Example: If the custom softkey label is IVR1, the custom
softkey id is custom_macro, then
$S#custom_macro$ means pressing the IVR1 soft key.
Note: To view the softkey ID, you can configure the value
of the parameter "edk.id_mode.enable" to 1 (Enabled)
and then long press the Volume Up key when the phone
is idle.
The functionality of performing this action is the same as
that of pressing the desired hard key.
Supported key names include:
LineKeyX (for SIP-T48G/S, X=1-29; for SIP-

T54S/T46G/T46S/T29G, X=1-27; for SIP-
T42G/T42S/T41P/T41S, X=1-15; for SIP-
T52S/T27P/T27G, X=1-21; for SIP-
T40P/T40G/T23P/T23G, X=1-3; for SIP-
T21(P) E2, X=1-2).
SoftKeyX (X ranges from 1 to 4)

ArrowUp

ArrowDown

ArrowLeft

ArrowRight

VolDown

VolUp

Cancel

OK

DialPadX (X ranges from 0 to 9)

DialPadPound

DialPadStar

Headset

Mute

Message
