Configuring Edk Soft Keys - Yealink SIP-T54S Administrator's Manual

mask password fields.
Example:
edk.edkprompt.1.userfeedback = masked
Note: It works only if the values of the parameters "features.enhanced_dss_keys.enable" and
"edk.edkprompt.X.enable" are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None

Configuring EDK Soft Keys

The soft keys can be used by the system administrator to customize the use of the soft keys on
the phone to suit users' needs. You can assign functions to soft keys using macros. This feature
is typically used to access frequently used functions or to create menu shortcuts to frequently
used phone settings.
You can configure the soft keys to display functions depending on the phone's menu level or
call state. For example, you can make a DPickup soft key available when the phone is in an
active call state.
Custom soft keys can be added in the following call states:
Idle - There are no active calls on the phone.

Alerting (or ringing) – There is an incoming call on the phone.

Connecting – There is an outgoing call on the phone. And the call is connecting.

Transfer connecting – There is a call being transferred to another phone. And the call is

connecting.
Talk – There is an active call on the phone.

Call failed – The outgoing call encounters a failure.

Ring back - There is an outgoing call on the phone. And the phone is in the ringback

state.
Transfer ring back - There is a call being transferred to another phone. And the phone is

in the ringback state.
Hold – The call is placed on hold on the phone.

Held – The call is held.

Conference – The phone sets up a conference call.

Dial tone – There is a dial tone you can hear on the phone.

Dialing – The phone is on the dialing screen.

Parameters
Configuring Advanced Features
Permitted Values Default
801