Phone Lock - Yealink SIP-T54S Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Features->General Information->Auto Logout Time(1~1000min)
Phone User Interface:
None
To configure the auto logout time via web user interface:
Click on Features->General Information.
1.
Enter the desired auto logout time in Auto Logout Time(1~1000min) field.
2.
Click Confirm to accept the change.
3.

Phone Lock

Phone lock is used to lock the IP phone to prevent it from unauthorized use. Once the IP phone
is locked, a user must enter the password to unlock it. IP phones offer three types of phone
lock: Menu Key, Function Keys and All Keys. The IP phone will not be locked immediately after
the phone lock type is configured. One of the following steps is also needed:
Long press the pound key when the IP phone is idle.
-
Press the phone lock key (if configured) when the IP phone is idle.
-
In addition to the above steps, you can configure the IP phone to automatically lock the phone
after a period of time.
926
Parameter Permitted Values Default