Incoming Intercom Calls - Yealink SIP-T54S Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
5.
Enter the remote extension number in the Value field.
6.
(Optional.) Enter the directed call pickup code in the Extension field.
7.
This field appears only if intercom subscription feature is enabled.
Press the Save soft key to accept the change.
8.

Incoming Intercom Calls

The IP phone can process incoming calls differently depending on settings. There are four
configuration options for incoming intercom calls:
Allow Intercom
Allow Intercom allows the IP phone to answer an incoming intercom call.
If you disable this feature, the IP phone will handle an incoming intercom call like a normal
incoming call instead of directly rejecting it.
Intercom Mute
Intercom Mute allows the IP phone to mute the microphone for incoming intercom calls.
Intercom Tone
Intercom Tone allows the IP phone to play a warning tone before answering an intercom call.
Intercom Barge
Intercom Barge allows the IP phone to automatically answer an incoming intercom call while an
active call is in progress. The active call will be placed on hold.
If you disable this feature, the IP phone will handle an incoming intercom call like a waiting call
while there is already an active call on the IP phone.
Procedure
Incoming intercom calls can be configured using the following methods.
Central Provisioning
(Configuration File)
554
<y0000000000xx>.cfg
Configure incoming intercom call
feature.
Parameters:
features.intercom.allow
features.intercom.mute
features.intercom.tone
features.intercom.barge