Yealink SIP-T54S Administrator's Manual page 826

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Description:
Configures the prompt text to be displayed on the Enhanced DSS Keys (EDK) prompt X
screen.
If it is left blank, no prompt displays.
Example:
edk.edkprompt.1.label = Enter Password
Note: It works only if the values of the parameters "features.enhanced_dss_keys.enable" and
"edk.edkprompt.X.enable" are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
edk.edkprompt.X.type
(X ranges from 1 to 10)
Description:
Configures the type of characters entered by the user for Enhanced DSS Keys (EDK) prompt
X.
If it is set to numeric, the default input method is 123, and you can switch to abc/ABC/2aB
input method.
If it is set to text, the default input method is abc, you can switch to ABC/2aB/123 input
method.
Example:
edk.edkprompt.1.type = numeric
Note: It works only if the values of the parameters "features.enhanced_dss_keys.enable" and
"edk.edkprompt.X.enable" are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
edk.edkprompt.X.userfeedback
(X ranges from 1 to 10)
Description:
Configures the user input feedback method for Enhanced DSS Keys (EDK) prompt X.
If it is set to visible, the entered text is visible.
If it is set to masked, the entered text displays as asterisk characters (*). It can be used to
800
Parameters Permitted Values
text or numeric
visible or masked
Default
text
visible