Call Number Filter - Yealink SIP-T54S Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Note: It is only applicable to SIP-T52S IP phones.
Web User Interface:
Dsskey->Line Key->Short
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Short Label
To configure a recall key via web user interface:
Click on Dsskey->Line Key (or Programable Key).
1.
In the desired DSS key field, select ReCall from the pull-down list of Type.
2.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
3.
Click Confirm to accept the change.
4.
To configure a recall key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired DSS key.
2.
Press
3.
Press
4.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
5.
Press the Save soft key to accept the change.
6.

Call Number Filter

Call number filter feature allows IP phone to automatically filter designated characters when
dialing.
Procedure
Call number filter can be configured using the following methods.
Central
Provisioning
(Configuration
File)
516
Parameters
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select ReCall from the Key Type field.
<y0000000000xx>.cfg
Permitted Values
Configure the characters the IP phone
filters when dialing.
Parameter:
Default