Yealink SIP-T54S Administrator's Manual page 344

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Details of Configuration Parameters:
dialplan.digitmap.enable
Description:
Enables or disables the digit map feature for the IP phone.
0-Disabled
1-Enabled
Note: The value configured by the parameter "account.X.dialplan.digitmap.enable" takes
precedence over that configured by this parameter.
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.string
Description:
Configures digit map pattern used for the dial plan.
Example:
dialplan.digitmap.string = <[2-9]x:86>3.T|0x.!|1xxx
Note: The string must be compatible with the digit map feature of MGCP described in 2.1.5
of RFC 3435. It works only if the value of the parameter "dialplan.digitmap.enable" or
"account.X.dialplan.digitmap.enable" is set to 1 (Enabled). The value configured by the
parameter "account.X.dialplan.digitmap.string" takes precedence over that configured by
this parameter.
Web User Interface:
None
318
d
account.X.dialplan.digitmap.apply_to.press_s
end
Parameters
Permitted
Default
Values
0 or 1 0
[2-9]11 | 0T |
011xxx.T | [0-
String 1][2-9]xx
within xxxxxxx | [2-
2048 9]xx xxxxxxx |
characters [2-9]xxxT |
**x.T | +x.T|
00x.T