Administrator's Guide for W60P/W53P/W41P DECT Phones
It configures the anonymous call on code.
The IP phone will send the code to activate anonymous call feature on server-side when you activate it on
the IP phone.
Description
Example:
account.1.anonymous_call_oncode = *72
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Account->Basic->Send Anonymous Code->On Code
Parameter account.X.anonymous_call_offcode
It configures the anonymous call off code.
The IP phone will send the code to deactivate anonymous call feature on server-side when you deactivate
it on the IP phone.
Description
Example:
account.1.anonymous_call_offcode = *73
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Account->Basic->Send Anonymous Code->Off Code
[1]
X is the account ID. X=1-8.
Call Number Filter
Call number filter feature allows IP phone to filter designated characters automatically when dialing.
Topic
Call Number Filter Configuration
Call Number Filter Configuration
The following table lists the parameter you can use to configure call number filter.
Parameter
features.call_num_filter
It configures the characters the IP phone filters when dialing.
If the dialed number contains configured characters, the IP phone will automatically filter these char-
acters when dialing.
Example:
Description
features.call_num_filter = -
If you dial 3-61, the IP phone will filter the character - and then dial out 361.
Note: If it is left blank, the IP phone will not automatically filter any characters when dialing.
Permitted Val-
String within 99 characters
ues
144
[1]
<MAC>.cfg
<y0000000000xx>.cfg