Yealink SIP-T54S Administrator's Manual page 69

If you are using CP860 IP phones, and the phones are first powered on or the phone settings
are reset to factory defaults, the setup wizard will appear on the LCD screen after startup. If not,
go to the next step.
Note
For more information on the setup wizard, refer to
The main LCD screen displays the following:
3.
Time and date

Soft key labels

Press the OK/√ key or press Menu->Status to check the IP phone status, the LCD screen
4.
displays the valid IP address, MAC address, firmware version, etc.
If the IP phone has successfully passed through these steps, it starts up properly and is ready
for use.
Yealink_CP860_User_Guide
Getting Started
.
43