Disabling/Enabling The Audible Tones - Beckman Coulter Allegra X-14 sERIES Instructions For Use Manual

Operation

Disabling/Enabling the Audible Tones

3
After the rotor has stopped and the LED by the door key lights, press
• The door opens.
4
Remove the rotor (or containers).
Disabling/Enabling the Audible Tones
The audible tones (beeps) that sound when a run-parameter key is pressed, or at the end of each
run, may be turned on and off by following the steps below (rotor must be at 0 RPM). The audible
tone that sounds when an error occurs cannot be disabled.
1
To disable the key press
display.
2
To disable the end-of-run tone, press
appear on the display.
Tones that have been disabled can be enabled as follows.
1
To enable a key press
display.
2
To enable the end-of-run tone press
appear on the display.
2-10
, then press
ENTER 2 3 6
, then press
ENTER
, then press . The words "
ENTER 2 3 5
, then press
ENTER
DOOR
. The words "
Disable KEY beeper
. The words "
2 2 3
Enable KEY beeper
. The words "
2 2 2
.
" appear on the
"
Disable RUN beeper
" appear on the
"
Enable RUN beeper
PN B07493AD