Authentication Super - HP 3600 v2 Series Command Reference Manual

Related commands: local-user, authentication default, and radius scheme.
Examples
# Configure ISP domain test to use local authentication for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal local
# Configure ISP domain test to use RADIUS scheme rd for authentication of portal users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal radius-scheme rd local

authentication super

Syntax
authentication
radius-scheme-name }
undo authentication super
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Description
Use the authentication super command to configure the authentication method for user privilege level
switching.
Use the undo authentication super command to restore the default.
By default, the default authentication method for the ISP domain is used for user privilege level switching
authentication.
The specified RADIUS or HWTACACS authentication scheme must have been configured.
Related commands: hwtacacs scheme and radius scheme; super authentication-mode (Fundamentals
Command Reference).
Examples
# Configure ISP domain test to use HWTACACS scheme tac for user privilege level switching
authentication.
<Sysname> system-view
[Sysname] super authentication-mode scheme
[Sysname] domain test
super { hwtacacs-scheme hwtacacs-scheme-name
10
| radius-scheme