Port-Security Timer Disableport - HP 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
time-value: Sets the aging timer in minutes for secure MAC addresses. The value is in the range of 0 to
129600. To disable the aging timer, set the timer to 0.
Description
Use the port-security timer autolearn aging command to set the secure MAC aging timer. The timer
applies to all sticky or dynamic secure MAC addresses.
Use the undo port-security timer autolearn command to restore the default.
By default, secure MAC addresses never age out.
Related commands: display port-security and port-security mac-address security.
Examples
# Set the secure MAC aging timer to 30 minutes.
<Sysname> system-view
[Sysname] port-security timer autolearn aging 30

port-security timer disableport

Syntax
port-security timer disableport time-value
undo port-security timer disableport
View
System view
Default level
2: System level
Parameters
time-value: Specifies the silence period during which the port remains disabled, in seconds. It is in the
range of 20 to 300.
Description
Use the port-security timer disableport command to set the silence period during which the port remains
disabled.
Use the undo port-security timer disableport command to restore the default.
By default, the silence period is 20 seconds.
If you configure the intrusion protection policy as disabling the port temporarily whenever it receives an
illegal frame, use this command to set the silence period.
Related commands: display port-security.
Examples
# Configure the intrusion protection policy as disabling the port temporarily whenever it receives an
illegal frame and set the silence period to 30 seconds.
<Sysname> system-view
184