State (Isp Domain View) - HP 3600 v2 Series Command Reference Manual

Description
Use the self-service-url enable command to enable the self-service server location function and specify
the URL of the self-service server.
Use the undo self-service-url enable command to restore the default.
By default, the self-service server location function is disabled.
With the self-service function, users can manage and control their accounts and passwords. Only the
RADIUS server systems provided by the Intelligent Management Center (iMC) support the self-service
function.
Examples
# For ISP domain test, enable the self-service server location function and specify the URL of the
self-service server for changing user password to http://10.153.89.94/selfservice.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable http://10.153.89.94/selfservice

state (ISP domain view)

Syntax
state { active | block }
undo state
View
ISP domain view
Default level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Description
Use the state command to set the status of an ISP domain.
Use the undo state command to restore the default.
By default, an ISP domain is in active state.
By blocking an ISP domain, you disable users of the domain that are offline from requesting network
services. The online users are not affected.
Examples
# Place the current ISP domain test to the state of blocked.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block
25