Accounting Portal - HP 3600 v2 Series Command Reference Manual

communication with the current accounting server fails. However, the switch will not send real-time
accounting updates for the user anymore. The accounting optional feature applies to scenarios where
accounting is not important.
NOTE:
After you configure the accounting optional command, the setting configured by the access-limit
command in local user view is not effective.
Examples
# Enable the accounting optional feature for users in domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting optional

accounting portal

Syntax
accounting portal { local | none | radius-scheme radius-scheme-name [ local ] }
undo accounting portal
View
ISP domain view
Default level
2: System level
Parameters
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Description
Use the accounting portal command to configure the accounting method for portal users.
Use the undo accounting portal command to restore the default.
By default, the default accounting method for the ISP domain is used for portal users.
The specified RADIUS scheme must have been configured.
Related commands: local-user, accounting default, and radius scheme.
Examples
# Configure ISP domain test to use local accounting for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal local
# Configure ISP domain test to use RADIUS scheme rd for accounting on portal users and use local
accounting as the backup.
<Sysname> system-view
6