HP 3600 v2 Series Command Reference Manual page 135

the max allowed user number is 2048 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent Mac User info:
MAC Addr
Ethernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Max number of on-line users is 2048
Current online user number is 0
MAC Addr Authenticate state
......(output omitted)
Table 10 Output description
Field
MAC address authentication is enabled
User name format is MAC address in
lowercase, like xxxxxxxxxxxx
Fixed username:
Fixed password:
Offline detect period
Quiet period
Server response timeout value
the max allowed user number
Current user number amounts to
Current domain: not configured, use default
domain
Silent Mac User info
Ethernet 1/0/1 is link-up
MAC address authentication is enabled
From Port
Description
Whether MAC authentication is enabled
Type of user account, which can be MAC-based or shared.
•
If MAC-based accounts are used, this field displays "User
name format is MAC address..." and the format settings for
usernames and passwords. For example, MAC addresses
without hyphens in lower case.
•
If a shared account is used, this field displays "User name
format is fixed account."
Username of the shared account for MAC authentication users. If
MAC-based accounts are used, this field displays mac.
Password of the shared account for MAC authentication users. If
MAC-based accounts are used, this field displays not
configured.
Setting of the offline detect timer
Setting of the quiet timer
Setting of the server timeout timer
Maximum number of users each slot supports
Number of online users
Authentication domain that is currently used
Information about silent MAC addresses. A MAC address is
marked silent when it fails a MAC authentication, and at the
same time, a quiet timer starts. Before the timer expires, the
device drops any packet from the MAC address and does not
perform MAC authentication for the MAC address.
Status of the link on port Ethernet 1/0/1. In this example, the link
is up.
Whether MAC authentication is enabled on port
Ethernet1/0/1.
125
Port Index
AuthIndex