State Secondary - HP 3600 v2 Series Command Reference Manual

View
RADIUS scheme view
Default level
2: System level
Parameters
accounting: Sets the status of the primary RADIUS accounting server.
authentication: Sets the status of the primary RADIUS authentication/authorization server.
active: Specifies the active state, the normal operation state.
block: Specifies the blocked state, the out-of-service state.
Description
Use the state primary command to set the status of a primary RADIUS server.
By default, the primary RADIUS server specified for a RADIUS scheme is in active state.
During an authentication or accounting process, the switch first tries to communicate with the primary
server if the primary server is in active state. If the primary server is unavailable, the switch changes the
status of the primary server to blocked, starts a quiet timer for the server, and then tries to communicate
with a secondary server in active state (a secondary RADIUS server configured earlier has a higher
priority). When the quiet timer of the primary server times out, the status of the server changes to active
automatically. If you set the status of the server to blocked before the quiet timer times out, the status of
the server cannot change back to active automatically unless you set the status to active manually.
When the primary server and secondary servers are both in blocked state, the switch communicates with
the primary server.
Related commands: display radius scheme and state secondary.
Examples
# Set the status of the primary server in RADIUS scheme radius1 to blocked.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] state primary authentication block

state secondary

Syntax
state secondary { accounting | authentication } [ ip ipv4-address | ipv6 ipv6-address ] { active | block }
View
RADIUS scheme view
Default level
2: System level
Parameters
accounting: Sets the status of the secondary RADIUS accounting server.
authentication: Sets the status of the secondary RADIUS authentication/authorization server.
ip ipv4-address: Specifies the IPv4 address of the secondary RADIUS server.
69