Ssh Client Authentication Server; Ssh Client First-Time Enable - HP 3600 v2 Series Command Reference Manual

Field
Server public key name

ssh client authentication server

Syntax
ssh client authentication server server assign publickey keyname
undo ssh client authentication server server assign publickey
View
System view
Default level
2: System level
Parameters
server: IP address or name of the server, a string of 1 to 80 characters.
assign publickey keyname: Specifies the name of the host public key of the server, a string of 1 to 64
characters.
Description
Use the ssh client authentication server command on a client to configure the host public key of a server
so that the client can determine whether the server is trustworthy.
Use the undo ssh authentication server command to remove the configuration.
By default, the host public key of the server is not configured, and when logging into the server, the client
uses the IP address or host name used for login as the public key name.
A client that does not support first-time authentication rejects unauthenticated servers. To enable the client
to use the correct public key of a server to authenticate the server, you must configure the public keys of
the servers and specify the mappings between public keys and servers on the client.
The specified host public key of the server must already exist.
Related commands: ssh client first-time enable.
Examples
# Configure the public key of the server with the IP address of 192.168.0.1 to be key1.
<Sysname> system-view
[Sysname] ssh client authentication server 192.168.0.1 assign publickey key1

ssh client first-time enable

Syntax
ssh client first-time enable
undo ssh client first-time
View
System view
Description
Name of the host public key of the server
258