Ldap-Server; Locality - HP 3600 v2 Series Command Reference Manual

Description
Use the ip command to configure the IP address of an entity.
Use the undo ip command to remove the configuration.
By default, no IP address is specified for an entity.
Examples
# Configure the IP address of an entity as 1 1.0.0.1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] ip 11.0.0.1

ldap-server

Syntax
ldap-server ip ip-address [ port port-number ] [ version version-number ]
undo ldap-server
View
PKI domain view
Default level
2: System level
Parameters
ip-address: IP address of the LDAP server, in dotted decimal format.
port-number: Port number of the LDAP server, in the range of 1 to 65535. The default is 389.
version-number: LDAP version number, either 2 or 3. By default, it is 2.
Description
Use the ldap-server command to specify an LDAP server for a PKI domain.
Use the undo ldap-server command to remove the configuration.
By default, no LDP server is specified for a PKI domain.
Examples
# Specify an LDAP server for PKI domain 1.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] ldap-server ip 169.254.0.30

locality

Syntax
locality locality-name
undo locality
View
PKI entity view
220