Secondary Authentication (Hwtacacs Scheme View) - HP 3600 v2 Series Command Reference Manual

Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the secondary HWTACACS accounting
server belongs to, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the server
is on the public network, do not specify this option.
Description
Use the secondary accounting command to specify the secondary HWTACACS accounting server.
Use the undo secondary accounting command to remove the configuration.
By default, no secondary HWTACACS accounting server is specified.
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If you configure the command repeatedly, only the last configuration takes effect.
If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance
vpn-instance-name option.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server affects only accounting processes that occur after
the remove operation.
NOTE:
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Related commands: display hwtacacs and vpn-instance (HWTACACS scheme view).
Examples
# Specify the IP address and port number of the secondary accounting server for HWTACACS scheme
hwt1 as 10.163.155.12 with TCP port number 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary accounting 10.163.155.12 49

secondary authentication (HWTACACS scheme view)

Syntax
secondary authentication ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo secondary authentication
View
HWTACACS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS authentication server, in dotted decimal notation.
The default is 0.0.0.0.
port-number: Service port number of the secondary HWTACACS authentication server. It ranges from 1
to 65535 and defaults to 49.
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents