Secondary Accounting (Radius Scheme View) - HP 3600 v2 Series Command Reference Manual

NOTE:
The maximum number of stop-accounting attempts, together with some other parameters, controls how
the NAS deals with stop-accounting request packets.
Suppose that the RADIUS server response timeout period is three seconds (set with the timer
response-timeout command), the maximum number of transmission attempts is five (set with the retry
command), and the maximum number of stop-accounting attempts is 20 (set with the retry
stop-accounting command). For each stop-accounting request, if the switch receives no response within
three seconds, it retransmits the request. If it receives no responses after retransmitting the request five
times, it considers the stop-accounting attempt a failure, buffers the request, and makes another
stop-accounting attempt. If 20 consecutive attempts fail, the switch discards the request.
Related commands:
stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting attempts to 1000 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] retry stop-accounting 1000

secondary accounting (RADIUS scheme view)

Syntax
secondary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key [ cipher | simple ] key
| vpn-instance vpn-instance-name ] *
undo secondary accounting [ ipv4-address | ipv6 ipv6-address ]
View
RADIUS scheme view
Default level
2: System level
Parameters
ipv4-address: IPv4 address of the secondary accounting server, in dotted decimal notation.
ipv6 ipv6-address: IPv6 address of the secondary accounting server.
port-number: Service port number of the secondary accounting server, a UDP port number in the range
of 1 to 65535. The default is 1813.
key [ cipher | simple ] key: Specifies the shared key (case sensitive) for secure communication with the
secondary RADIUS accounting server. Follow these guidelines:
This shared key must be the same as that configured on the RADIUS server.
•
• With the cipher keyword specified, the key must be a ciphertext string of 12, 24, 32, 44, 64, 76, 88,
or 96 characters, for example, _(TT8F]Y\5SQ=^Q`MAF4<1!!, and the key will be displayed in
cipher text.
With the simple keyword specified, the key must be a plaintext string of 1 to 64 characters, for
•
example aabbcc, and the key will be displayed in plain text.
retry, retry stop-accounting,
64
timer response-timeout, and display