Ip Source Binding - HP 3600 v2 Series Command Reference Manual

Field
Type

ip source binding

Syntax
ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address |
mac-address mac-address }
undo ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address |
mac-address mac-address }
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
ip-address ip-address: Specifies the IPv4 address for the static binding entry. The IPv4 address cannot be
127.x.x.x, 0.0.0.0, or a multicast IP address.
mac-address mac-address: Specifies the MAC address for the static binding in the format H-H-H. The
MAC address cannot be all 0s, all Fs (a broadcast address), or a multicast address.
Description
Use the ip source binding command to configure a static IPv4 source guard binding entry on a port.
Use the undo ip source binding command to delete a static IPv4 source guard binding entry from a port.
By default, no static IPv4 binding entry exists on a port.
You cannot configure the same static binding entry repeatedly on one port, but you can configure the
same static entry on different ports.
You cannot configure a static binding entry on a port that is in an aggregation group or a service
loopback group.
Related commands: display ip source binding static.
Examples
# Configure a static IPv4 binding entry (IP+MAC binding) on port Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1]
0001-0001-0001
Description
Type of the binding entry, including:
•
Static-IPv6—static IPv6 binding entry
•
DHCPv6-SNP—entry generated based on DHCPv6 snooping entry
•
ND-SNP—entry generated based on ND snooping entry
ip source
294
binding ip-address 192.168.0.1 mac-address