Display Arp Detection - HP 3600 v2 Series Command Reference Manual

Parameters
None
Description
Use the arp restricted-forwarding enable command to enable ARP restricted forwarding.
Use the undo arp restricted-forwarding enable command to disable ARP restricted forwarding.
By default, ARP restricted forwarding is disabled.
Examples
# Enable ARP restricted forwarding in VLAN 1.
<Sysname> system-view
[Sysname] vlan 1
[Sysname-vlan1] arp restricted-forwarding enable

display arp detection

Syntax
display arp detection [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display arp detection command to display the VLAN(s) enabled with ARP detection.
Related commands: arp detection enable.
Examples
# Display the VLANs enabled with ARP detection.
<Sysname> display arp detection
ARP detection is enabled in the following VLANs:
1, 2, 4-5
Table 50 Output description
Field
ARP detection is enabled in the following VLANs
Description
VLANs that are enabled with ARP detection
310