Timer Response-Timeout (Hwtacacs Scheme View) - HP 3600 v2 Series Command Reference Manual

View
HWTACACS scheme view
Default level
2: System level
Parameters
minutes: Real-time accounting interval in minutes, zero or a multiple of 3 in the range of 3 to 60. A value
of zero means "Do not send online user accounting information to the HWTACACS server."
Description
Use the timer realtime-accounting command to set the real-time accounting interval.
Use the undo timer realtime-accounting command to restore the default.
By default, the real-time accounting interval is 12 minutes.
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is for setting the interval.
The setting of the real-time accounting interval somewhat depends on the performance of the NAS and
the HWTACACS server. A shorter interval requires higher performance. Use a longer interval when there
are a large number of users (more than 1000, inclusive).
Table 8 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51

timer response-timeout (HWTACACS scheme view)

Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Default level
2: System level
Real-time accounting interval (minute)
3
6
12
15 or more
93