Port-Security Timer Autolearn Aging - HP 3600 v2 Series Command Reference Manual

Keyword
userlogin-secure-or
-mac-ext
userlogin-withoui
Description
Use the port-security port-mode command to set the port security mode of a port.
Use the undo port-security port-mode command to restore the default.
By default, a port operates in noRestrictions mode, where port security does not take effect.
To change the security mode of a port security enabled port, you must set the port in noRestictions mode
first. When the port has online users, you cannot change port security mode.
IMPORTANT:
If you are configuring the autoLearn mode, first set port security's limit on the number of MAC addresses
by using the port-security max-mac-count command. You cannot change the setting when the port is
operating in autoLearn mode.
When port security is enabled, you cannot manually enable 802.1X or MAC authentication, or change
the access control mode or port authorization state. The port security automatically modifies these
settings in different security modes.
Related commands: display port-security.
Examples
# Enable port security and set port Ethernet 1/0/1 in secure mode.
<Sysname> system-view
[Sysname] port-security enable
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security port-mode secure
# Change the port security mode of port Ethernet 1/0/1 to userLogin.
[Sysname-Ethernet1/0/1] undo port-security port-mode
[Sysname-Ethernet1/0/1] port-security port-mode userlogin

port-security timer autolearn aging

Syntax
port-security timer autolearn aging time-value
undo port-security timer autolearn aging
View
System view
Security mode Description
Similar to the macAddressOrUserLoginSecure mode except that a
macAddressOrUse
port in this mode supports multiple 802.1X and MAC
rLoginSecureExt
authentication users.
Similar to the userLoginSecure mode. In addition, a port in this
mode also permits frames from a user whose MAC address
contains a specific OUI (organizationally unique identifier).
userLoginWithOUI
For wired users, the port performs 802.1X authentication upon
receiving 802.1X frames, and performs OUI check upon receiving
non-802.1X frames.
183