Ssh Client Ipv6 Source - HP 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
None
Description
Use the ssh client first-time enable command to enable the first-time authentication function.
Use the undo ssh client first-time command to disable the function.
By default, the function is enabled.
With first-time authentication, when an SSH client not configured with the server host public key accesses
the server for the first time, the user can continue accessing the server, and save the host public key on
the client. When accessing the server again, the client uses the saved server host public key to
authenticate the server.
Without first-time authentication, a client that is not configured with the server host public key refuses to
access the server. To access the server, a user must configure in advance the server host public key locally
and specify the public key name for authentication.
Because the server might update its key pairs periodically, clients must obtain the most recent public keys
of the server for successful authentication of the server.
Examples
# Enable the first-time authentication function.
<Sysname> system-view
[Sysname] ssh client first-time enable

ssh client ipv6 source

Syntax
ssh client ipv6 source { ipv6 ipv6-address | interface interface-type interface-number }
undo ssh client ipv6 source
View
System view
Default level
3: Manage level
Parameters
ipv6 ipv6-address: Specifies a source IPv6 address.
interface interface-type interface-number: Specifies a source interface by its type and number.
Description
Use the ssh client ipv6 source command to specify the source IPv6 address or source interface for the
SSH client.
Use the undo ssh client ipv6 source command to remove the configuration.
By default, an SSH client uses the IPv6 address of the interface specified by the route of the device to
access the SSH server.
259