Habp Configuration Commands; Display Habp - HP 3600 v2 Series Command Reference Manual

HABP configuration commands

display habp

Syntax
display habp [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display habp command to display HABP configuration information.
If the HABP function is not enabled on the device, this command does not display the HABP configuration
but only the running status of the HABP function.
Examples
# Display HABP configuration information.
<Sysname> display habp
Global HABP information:
HABP Mode: Server
Sending HABP request packets every 20 seconds
Bypass VLAN: 2
Table 24 Output description
Field
HABP Mode
Sending HABP request packets every 20 seconds
Bypass VLAN
Description
HABP mode of the current device, server or client
The HABP server sends HABP request packets at an
interval of 20 seconds.
ID of the VLAN in which HABP packets are transmitted
190