Attribute 25 Car - HP 3600 v2 Series Command Reference Manual

View
RADIUS scheme view
Default level
2: System level
Parameters
seconds: Time interval for retransmitting an accounting-on packet in seconds, ranging from 1 to 15. The
default is 3 seconds.
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255.
The default is 50.
Description
Use the accounting-on enable command to configure the accounting-on feature. This feature enables the
switch to, after rebooting, automatically send an accounting-on message to the RADIUS accounting
server indicated by the RADIUS scheme to stop accounting for and log out online users.
Use the undo accounting-on enable command to disable the accounting-on feature.
By default, the accounting-on feature is disabled.
Parameters set with the accounting-on enable command take effect immediately.
NOTE:
After executing the accounting-on enable command, issue the save command to make sure that the
command takes effect after the switch reboots. For information about the save command, see
Fundamentals Command Reference
Related commands: radius scheme.
Examples
# Enable the accounting-on feature for RADIUS authentication scheme radius1, set the retransmission
interval to 5 seconds, and set the transmission attempts to 15.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15

attribute 25 car

Syntax
attribute 25 car
undo attribute 25 car
View
RADIUS scheme view
Default level
2: System level
Parameters
None
.
40