Table 85 Ethernet Statistics - WaveRider LMS4000 User Manual

To Display (all) Statistics from the CLI
• At the command prompt, type stats and press Enter.
The following sections describe each of the statistics in detail and the procedure for obtaining
specific sets of statistics (Ethernet, Radio, and so on).
Ethernet Statistics
Ethernet Statistics present operational information about data passing through the CCU and
EUM Ethernet ports. These statistics are described in
As indicated in

Table 85 Ethernet Statistics

Statistic
Interrupts
RX Interrupts
RX Overrun Interrupts
RX In Progress Interrupts
TX Complete Interrupts
TX Error Interrupts
TX Carrier Lost Interrupts
TX Alloc Interrupts
TX EPH Interrupts
TX ERCV Interrupts
224
Table 85, all of the Ethernet statistics are available in a WaveRider MIB.
Available
Table 85.
in MIB
Total number of interrupts received by the
Ethernet driver ISR, interrupt service routine.
Number of receive complete interrupts
received by the Ethernet driver ISR.
Number of overrun interrupts received by the
Ethernet driver ISR. An overrun occurs when a
received packet has exceeded the packet
size, or the processor has missed one or more
packets.
Number of times a receive complete interrupt
was received by the Ethernet driver ISR
before the current packet was finished.
Number of normal transmit interrupts received
by the Ethernet driver ISR.
Number of transmit error interrupts received
by the Ethernet driver ISR.
Number of transmit carrier lost interrupts
received by the Ethernet driver ISR.
Number of transmit allocation complete
interrupts received by the Ethernet driver ISR.
Number of transmit EPH interrupts (Ethernet
protocol handler interrupts) received by the
Ethernet driver ISR.
Number of transmit ERCV interrupts (early
receive interrupts) received by the Ethernet
driver ISR.
Description
APCD-LM043-4.0