WaveRider LMS4000 User Manual page 186

Command Syntax (CCU)
ip ethernet <aaa.bbb.ccc.ddd>
(0-32)
ip gateway
ip gateway <aaa.bbb.ccc.ddd>
ip radio
ip radio <aaa.bbb.ccc.ddd> (0-
32)
password
pcf
ping <aaa.bbb.ccc.ddd>
port
port add <port number>
tcp|udp|both
port delete <port number>
port flush
port print
radio
168
Command Description
Changes the Ethernet IP address of the
CCU, where:
• <aaa.bbb.ccc.ddd> is the new
Ethernet IP address of the CCU.
• (0-32) is the netmask.
Displays the IP address of the router
through which the CCU connects to the
Internet.
Defines the router through which the CCU
connects to the Internet, where:
• <aaa.bbb.ccc.ddd> is the new
Ethernet IP address of the router.
Displays the radio IP address of the CCU.
Changes the radio IP address of the CCU,
where:
• <aaa.bbb.ccc.ddd> is the new IP
address of the CCU radio.
• (0-32) is the netmask.
Initiates the process for changing the
system password.
Displays the permanent configuration file
(PCF).
Sends ICMP echo requests to a remote
host, where:
• <aaa.bbb.ccc.ddd> is the Ethernet
IP address of the remote host.
Press any key to halt.
Displays the TCP/UDP port filters.
Adds or modifies a port filter, where:
• <port number> is the number of the
port to be filtered.
• One of tcp|udp|both is selected to
filter TCP or UDP messages, or both.
Deletes a port filter, where:
• <port number> is the port to be
deleted.
Deletes all port filters.
Prints port filters.
Displays the radio attributes of the CCU.
APCD-LM043-4.0