To set the CCU radio IP address
1. Type ip radio <aaa.bbb.ccc.ddd> <net mask> and press Enter.
•
•
2. Type save or commit and press Enter.
3. Before the new CCU radio IP address will take effect, you must reboot the CCU by
typing reset and pressing Enter
NOTE: The CCU Ethernet and gateway IP addresses must be on the
To set the CCU gateway IP address
1. Type ip gateway <aaa.bbb.ccc.ddd> and press Enter.
•
2. Type save or commit and press Enter.
Example:
The following example
•
Sets the CCU Ethernet IP address to 10.0.4.48 / 16,
•
Sets the CCU radio IP address to 10.5.0.1 / 16,
•
Sets the CCU gateway IP address to 10.0.0.1,
•
Saves the new settings,
•
Reboots the CCU so that the new parameters take effect, and
•
Displays the CCU IP parameters.
Console>
Console> ip ethernet 10.0.4.48 16
Console> ip radio 10.5.0.1 16
Console> ip gateway 10.0.0.1
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
Console>
Console> reset
rebooting CCU ...
(... Power On Self Test ...)
WaveRider Communications, Inc. LMS3000
Password:
Console>
Console> ip
Ethernet IP Address: 10.0.4.48
APCD-LM043-4.0
<aaa.bbb.ccc.ddd> is the CCU radio IP address.
<net mask> is the net mask.
same subnet, as explained in
53.
<aaa.bbb.ccc.ddd> is the CCU gateway IP address.
LMS4000 IP Addressing
7 Configuring the CCU
on page
87