Appendix C Command-Line Syntax
This appendix describes the various LMS4000 commands and syntax, and consists of the
following sections:
•
Command-line Syntax Conventions and Shortcuts
•
CCU Command-line Syntax
•
EUM Command-line Syntax
NOTE: The help command on the CCU or EUM may display additional
To Access the Command-line Interface
•
In the WaveRider Configuration Utility, click the Windows menu and select Use
Terminal Screen.
Command-line Syntax Conventions and Shortcuts
Table 44
shows the typographical conventions used to represent command-line syntax.
45
provides a list of shortcuts and methods to get help on commands. To execute a command,
type the command and press Enter.
APCD-LM043-4.0
on page 165
on page 174
commands that are not listed in the following tables. WaveRider
recommends that you use only commands listed in this Appendix.
CAUTION: When entering IP addresses in the CCU or EUM,
note that a leading '0' forces the CCU/EUM operating system to
interpret the entry as octal rather than decimal. For example,
pinging 10.0.2.010 actually pings 10.0.2.8
on page 163
Table
163