WaveRider LMS4000 User Manual page 112

7 Configuring the CCU
Example:
The following example
• Sets the SNMP contact as WaveRider,
• Sets the SNMP location as Calgary_South,
• Adds SNMP read community WaveRider_Calgary,
• Adds SNMP write community WaveRider_Calgary,
• Adds SNMP trap server WaveRider_Calgary, IP address 10.0.1.68,
• Saves the new settings, and
• Displays the SNMP settings.
Example:
Console>
Console> snmp contact WaveRider
Console> snmp location Calgary_South
Console> snmp community add WaveRider_Calgary read
Console> snmp community add WaveRider_Calgary write
Console> snmp trap add 10.0.1.68 WaveRider_Calgary
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
Console>
Console> snmp
Contact: WaveRider
Location: Calgary_South
Name: LMS3000
SNMP Read Communities:
WaveRider_Calgary
SNMP Write Communities:
WaveRider_Calgary
SNMP Traps:
10.0.1.68 WaveRider_Calgary
Console>
94 APCD-LM043-4.0