Configuring Dhcp Relay - WaveRider LMS4000 User Manual

7 Configuring the CCU
Ethernet Net Mask
Gateway IP Address: 10.0.0.1
Radio IP Address: 10.5.0.1
Radio Net Mask
Console>
7.5

Configuring DHCP Relay

To configure DHCP relay
• Determine the DHCP server IP address.
• Enable DHCP Relay.
• Add the DHCP server to the CCU.
To add a DHCP server
1. Type dhcp relay add <aaa.bbb.ccc.ddd> <net mask> and press Enter.
•
•
2. Repeat step 1 for any alternate DHCP servers in your network. WaveRider
recommends that your network have at least one alternate DHCP server.
3. Type save or commit and press Enter.
To enable DHCP Relay
1. Type dhcp enable and press Enter.
2. Type save or commit and press Enter.
Example:
The following example
• Enables DHCP relay,
• Adds a DHCP server with IP address 192.168.50.1 /24,
• Adds an alternate DHCP server with IP address 192.168.50.15 /24,
• Saves the new settings, and
• Displays the DHCP status.
Console> dhcp enable
Console>
Console> dhcp relay add 192.168.50.1 24
Console> dhcp relay add 192.168.50.15 24
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
88
: ffff0000
: ffff0000
<aaa.bbb.ccc.ddd> is the IP address of the DHCP server you want to add.
<net mask> is the net mask of the DHCP server.
APCD-LM043-4.0