WaveRider LMS4000 User Manual page 185

Command Syntax (CCU)
exit|quit
file ?
file copy|cp <source>
<destination>
file delete <filename>
file dir|ls
file get <aaa.bbb.ccc.ddd>
<username> <password> <source>
<destination>
file mkboot|makeboot <filename>
file rename|rn <old file name>
<new file name>
help
ip
ip ethernet
APCD-LM043-4.0
Command Description
Exits the current console session and
returns to the password prompt.
Lists the file system utilities.
Copies a file. Use this command only when
upgrading the firmware.
• <source> is the name of the source
file.
• <destination> is the name of the
destination file.
Deletes a file, where.
• <filename> is the name of the file you
want to delete.
Lists the file directory.
Retrieves a file from a remote location,
where.
• <aaa.bbb.ccc.ddd> is the IP
address or hostname of the computer
from which you are retrieving the file.
• <username> is the user name required
to log on to the remote computer. (If
there is no username, as with an EUM,
then use the password in place of the
username.)
• <password> is the password required
to log on to the remote computer
• <source> is the path and filename of
the file that is being retrieved from the
remote computer.
• <destination> is the path and
filename to which the file will be copied.
Makes a new boot file, where:
• <filename> is the name of the new
boot file.
Renames a file, where:
• <old file name> is the old file name
• <new file name> is the new file
name.
Displays the console command structure.
Displays the CCU IP address assignments.
Displays the Ethernet IP address of the
CCU.
167