Appendix G SNMP MIB Definitions
This appendix defines the MIBs used in the CCU and EUM. These MIBs are organized under
the following headings:
•
MIB-II Elements Supported from RFC-1213
•
WaveRider CCU Enterprise MIBs
•
CCU RFC MIB-II Traps
•
WaveRider EUM Enterprise MIBs
•
EUM RFC MIB-II Traps
MIB-II Elements Supported from RFC-1213
The CCU and EUM support the following MIB-II groups, which are defined in detail in
RFC1213.
Groups in MIB-II
MIB-II is divided into the following MIBs. All values in
Table 59 Groups in MIB-II
MIB Name
OID
system
interfaces
APCD-LM043-4.0
on page 212
on page 221
Type
Status
1
MIB
R
2
MIB
R
on page 199
on page 203
on page 213
Table 59
Description
This group provides information on the general system, such as
system description, contact, system up time.
This group has one set of values for each interface on the modem.
The CCU/EUM has 3 interfaces: 1= loopback, 2 = esmc0
(ethernet) and 2 = mdr1 (radio).
are prefixed by 1.3.6.1.2.1.
199