WaveRider LMS4000 User Manual page 188

Command Syntax (CCU)
route delete <aaa.bbb.ccc.ddd>
<eee.fff.ggg.hhh> (0-32)
route stats
save|commit
snmp
snmp community
snmp community add <community>
<read|write>
snmp community delete
<community>
snmp contact
snmp contact <contact>
snmp interface
snmp location
snmp location <location>
snmp trap
snmp trap add <aaa.bbb.ccc.ddd>
<community>
170
Command Description
Deletes a route from the routing table.
• <aaa.bbb.ccc.ddd> is the Ethernet
IP address of the network being
removed from the routing table.
• <eee.fff.ggg.hhh> is the Ethernet
IP address of the gateway through
which the destination device is
reached.
• (0-32) is the netmask for the
destination network.
Displays the routing statistics.
Saves configuration changes.
Displays the CCU SNMP information.
Displays the SNMP communities.
Adds an SNMP community, where.
• <community> is the name of the
SNMP community being added, from 1-
32 characters in length.
• Enter <read> or <write> to indicate
the type of the community being added.
Deletes an SNMP community, where:
• <community> is the name of the
SNMP community being deleted.
Displays the SNMP system contact.
Changes the SNMP system contact, where:
• <contact> is the name of the contact
(WISP, for example), from 1-80
characters in length.
Displays the SNMP interface MIBs.
Displays the SNMP system location.
Changes the SNMP system location, where:
• <location> is the location of the
CCU, from 1-80 characters in length.
Displays the SNMP Trap Server Table.
Adds a trap server community, where:
• <aaa.bbb.ccc.ddd> is the Ethernet
IP address of the trap server.
• <community> is the community name
for the trap server, from 1-64
characters in length.
APCD-LM043-4.0