WaveRider LMS4000 User Manual page 194

Command Syntax (EUM)
ip ethernet <aaa.bbb.ccc.ddd>
(0-32)
ip gateway
ip gateway <aaa.bbb.ccc.ddd>
password
pcf
ping aaa.bbb.ccc.ddd
port
port add <port number>
tcp|udp|both
port delete <port number>
port flush
port print
radio
radio frequency
radio frequency <frequency>
176
Command Description
Changes the Ethernet IP address of the
EUM, where:
• <aaa.bbb.ccc.ddd> is the new
Ethernet IP address of the EUM.
• (0-32) is the netmask.
Displays the IP address of the CCU through
which the EUM connects to the Internet.
Changes the CCU through which the EUM
connects to the Internet, where:
• <aaa.bbb.ccc.ddd> is the radio IP
address of the new CCU.
Initiates the process for changing the
system password.
Displays the permanent configuration file
(PCF).
Sends ICMP echo requests to remote host,
where:
• <aaa.bbb.ccc.ddd> is the Ethernet
IP address of the remote host.
Press any key to halt.
Displays the TCP/UDP port filters.
Adds or modifies a port filter, where:
• <port number> is the number of the
port to be filtered.
• One of tcp|udp|both is selected to
filter TCP or UDP messages, or both.
Deletes a port filter, where:
• <port number> is the port to be
deleted.
Deletes all port filters.
Prints port filters.
Displays the radio attributes of the EUM.
Displays the EUM radio frequency in tenths
of a MHz; for example, 905.0 MHz would be
displayed as 9050.
Changes the EUM radio frequency.
• <frequency> is the radio frequency in
tenths of a MHz; for example, 905.0
MHz would be entered as 9050.
APCD-LM043-4.0