WaveRider LMS4000 User Manual page 184

Command Syntax (CCU)
arp map
arp map <aaa.bbb.ccc.ddd>
auth
auth add <eum id> <gos>
auth default <gos>
auth del <eum id>
auth gos <gos>
bcf
dhcp
dhcp disable
dhcp enable
dhcp relay
dhcp relay add <aaa.bbb.ccc.ddd>
<net mask>
dhcp relay del <aaa.bbb.ccc.ddd>
dhcp relay flush
166
Command Description
Displays the ARP Map Table.
Maps MAC address to IP address
<aaa.bbb.ccc.ddd>. The MAC address
is obtained from the ARP Table, or by
sending out an ARP request.
Displays the Authorization Table.
Adds an EUM to the Authorization Table,
where:
• <eum id> is the EUM ID, formatted in
hexadecimal as XX:XX:XX.
• <gos> is the EUM grade of service, for
example, gold.
Sets the default GOS, which is the GOS
assigned to an EUM on registration, where.
• <gos> is the default grade of service,
for example, bronze.
Removes an EUM from the Authorization
Table, where:
• <eum id> is the EUM ID, formatted in
hexadecimal as XX:XX:XX.
Displays the GOS definitions, where:
• <gos> is the grade of service, for
example, bronze.
Displays the basic configuration file (BCF).
Displays status of CCU DHCP Relay, either
enabled or disable.
Disables DHCP relay.
Enables DHCP relay.
Displays the CCU DHCP relay status and
contents of the DHCP Server Table.
Adds the DHCP server IP address, where:
• <aaa.bbb.ccc.ddd> is the IP
address of the DHCP server.
• <net mask> is the net mask of the
DHCP server.
Deletes the DHCP server IP address,
where:
• <aaa.bbb.ccc.ddd> is the IP
address of the DHCP server.
Flushes the DHCP server IP addresses.
APCD-LM043-4.0