Table 39 Ethernet Interface Specifications; Table 40 Power Supply Specifications; Table 41 Environmental Specifications - WaveRider LMS4000 User Manual

Co-located Channel Set Center
Frequencies (standard)
Modulation Scheme
Receiver Sensitivity for BER < 10
Maximum Over-the-Air, Raw Data Rate
Maximum Output Power

Table 39 Ethernet Interface Specifications

CCU Physical Interface
EUM Physical Interface

Table 40 Power Supply Specifications

AC Input
AC Input Frequency
Maximum Input Current

Table 41 Environmental Specifications

Operating Temperature
Storage Temperature
158
905 MHz, 915 MHz, 925 MHz
Note: Other frequencies can be used,
depending on site-specific considerations.
Call WaveRider for more information.
Based on DSSS (Direct-Sequence Spread
Spectrum) signals, modulated with CCK
(Complementary Code Keying), and Barker-
coded BPSK (Binary Phase Shift Keying)
and QPSK (Quaternary Phase Shift Keying)
-5 Better than -86 dBm
2.75 Mbps
+26 dBm
10BaseT (Ethernet)
10BaseT (Ethernet)
110/230 ± 15% VAC, single phase
50/60 ± 3 Hz
0.2 A
0°C to +50°C, indoor CCU
10°C to +40°C, indoor EUM
(10%-80% RH non-condensing)
-40°C to +70°C
APCD-LM043-4.0