Ping Commands; Table 58 Windows Ping Test Command Options - WaveRider LMS4000 User Manual

Appendix F
The following table lists the options available for use with a Windows Ping test. This
information was obtained from Microsoft Windows 2000 TCP/IP Protocols and Services
Technical Reference, pp. 184-185.

Table 58 Windows Ping Test Command Options

Option
-t
-a
-n count
-l size
-f
-I TTL
-v TOS
-r count
-s count
APCD-LM043-4.0

Ping Commands

Sends Echoes until interrupted.
Performs a Domain Name System (DNS) reverse query to
resolve the DNS hose name of the specified IP address
The number of Echoes to send
The size of the Optional Data field up to a maximum of
65,500
Sets the Don't Fragment (DF) flag to 1
Sets the value of the TTL field in the IP header
Sets the value of the Type of Service field in the IP header.
The TOS value is in decimal
Sends the ICMP Echoes using the IP Record Route option
and sets the value of the number of slots. Count has a
maximum value of 9.
Sends the ICMP Echoes using the IP Internet Timestamp
option and sets the value of the number of slots. Count
has a maximum value of 4. Windows 2000 PING uses the
Internet Timestamp FLAG set to 1 (records both the IP
addresses of each hop and the timestamp.
Use Default
Not set
Not set
4
32
Not set
32
0
Not set
Not set
197