7 Configuring the CCU
•
Adds a local NTP server, IP address 10.0.0.1,
•
Sets the resynchronization time to 3600 seconds,
•
Sets the retry time to 30 seconds,
•
Enables the SNTP client,
•
Enables the SNTP relay,
•
Saves the new entries,
•
Displays the SNTP configuration and NTP server list, and
•
Displays the system time.
Example:
Console> time flush
Console> time add 127.0.0.1
Console> time add 10.0.0.1
Console> time client resync 3600
Console> time client retry 30
Console> time client enable
Console> time relay enable
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
Console>
Console> time print
SNTP Client and Relay Configuration
-----------------------------------
Relay
Enabled :
Destination :
Send time on...
Boot :
EUM Registration :
Server (send/listen)
Port :
Unsynchronized Stratum : 15
Synchronized Stratum :
Client (fetch only)
Enabled :
Port :
Resync period :
Retry period :
NTP SERVERS
-----------------------------------
10.0.0.1
127.0.0.1
-----------------------------------
Console>
Console> time
28-FEB-2002 17:03:30
Console>
92
Yes
Default Net Broadcast. (radio IF)
Yes
Yes
123
Received NTP Stratum +5
Yes
123
3600 seconds.
30 seconds.
APCD-LM043-4.0