Configuring Snmp - WaveRider LMS4000 User Manual

8 Configuring the EUM
8.5

Configuring SNMP

To fully configure SNMP
• Set the SNMP contact (name of the WISP, for example).
• Set the SNMP system location (physical location of the EUM, for example).
• Add an SNMP read community.
• Add an SNMP write community.
• Add an SNMP trap server.
To set the SNMP contact
1. Type snmp contact <contact> and press Enter.
•
2. Type save or commit and press Enter.
To set the SNMP system location
1. Type snmp location <location> and press Enter.
•
2. Type save or commit and press Enter.
To add an SNMP read community
1. Type snmp community add <community> read and press Enter.
•
2. Type save or commit and press Enter.
To add an SNMP write community
1. Type snmp community add <community> write and press Enter.
•
2. Type save or commit and press Enter.
To add an SNMP trap server
1. Type snmp trap add <aaa.bbb.ccc.ddd> <community> and press Enter.
•
•
2. Type save or commit and press Enter.
102
<contact> is a name and phone number, a URL, or an email address, from 1-
80 characters in length.
<location> is the location of the EUM, from 1-80 characters in length.
<community> is the name of the read community string. The default read
community string is "public". The read community string can be from 1-32
characters in length, but spaces are not allowed.
<community> is the name of the write community string. The default write
community string is "private". The write community string can be from 1-32
characters in length, but spaces are not allowed.
<aaa.bbb.ccc.ddd> is the IP address of the trap server
<community> is the name of the community on the trap server, from 1-64
characters in length.
APCD-LM043-4.0