EUM Command-line Syntax
Table 47 EUM Command-Line Syntax
Command Syntax (EUM)
arp
arp add <aaa.bbb.ccc.ddd>
<XX:XX:XX:XX:XX:XX> [flags]
arp del <aaa.bbb.ccc.ddd>
arp flush
arp map
arp map <aaa.bbb.ccc.ddd>
bcf
cust
cust flush
cust max
cust max <value>
exit|quit
file ?
174
Command Description
Displays the ARP Table.
Adds an entry to the ARP table, where.
• <aaa.bbb.ccc.ddd> is the IP
address.
• <XX:XX:XX:XX:XX:XX> is the
Ethernet address, in hexadecimal
format.
• [flags] is always set to 4, meaning
the entry is permanent and doesn't time
out, as long as the CCU or EUM is ON.
Deletes an entry from the ARP table, where.
• <aaa.bbb.ccc.ddd> is the IP
address of the entry.
Clears the ARP table.
Displays the ARP Map Table.
Maps MAC address to IP address
<aaa.bbb.ccc.ddd>. The MAC address
is obtained from the ARP Table, or by
sending out an ARP request.
Displays the basic configuration file (BCF).
Displays the Customer Table.
Removes all entries from the Customer
Table.
Displays the maximum number of
customers.
Sets the maximum number of customers,
where:
• <value> is the maximum number of
customers, from 1-50.
Exits the current console session and
returns to the password prompt.
Lists the file system utilities.
APCD-LM043-4.0