WaveRider LMS4000 User Manual page 196

Command Syntax (EUM)
snmp trap add <aaa.bbb.ccc.ddd>
<community>
snmp trap delete
<aaa.bbb.ccc.ddd> <community>
stats
stats clear
stats ethernet
stats mac
stats net
stats net icmp
stats net ip
stats net tcp
stats net udp
stats radio
stats rp
stats summary
sys ?
sys log <number> <offset>
sys mac
sys memory
178
Command Description
Adds a trap server community, where:
• <aaa.bbb.ccc.ddd> is the Ethernet
IP address of the EUM.
• <community> is the community name
for the trap server, from 1-64
characters in length.
Deletes a trap server community, where:
• <aaa.bbb.ccc.ddd> is the Ethernet
IP address of the EUM.
• <community> is the community name
for the trap server being deleted, from
1-64 characters in length.
Displays the statistics for all drivers and
network protocols. Do not use this
command in a Telnet session since doing so
will display only a partial set of stats.
Clears the statistics for all drivers.
Displays Ethernet statistics.
Displays MAC driver statistics.
Displays network protocol statistics.
Displays ICMP statistics.
Displays IP statistics.
Displays TCP statistics.
Displays UDP statistics.
Displays radio driver statistics.
Displays routing protocol statistics.
Displays a summary of the Atmel MAC
statistics.
Displays system information commands.
Displays the modem log file, where:
• <number> is the number of characters
to print from the log file.
• <offset> is the character offset,
default is 0.
Displays the MAC log.
Displays memory allocation information.
APCD-LM043-4.0