2. Type save or commit and press Enter.
3. Before the new power level will take effect, you must reboot the EUM by typing reset
and pressing Enter.
Example:
The following example
•
Sets the EUM operating frequency to 917 MHz,
•
Sets the transmit power level to high,
•
Saves the new settings,
•
Reboots the EUM so that they new parameters take effect, and
•
Displays the EUM RF parameters.
Console>
Console> radio frequency 9170
Console> radio rf high
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Console>
Console> reset
rebooting EUM ...
(... Power On Self Test ...)
WaveRider Communications, Inc. LMS3000
Password:
Console>
Console> radio
RF Power: HIGH
Radio Frequency: 9170
Console>
8.3
Configuring EUM IP Parameters
In
IP Network Planning
•
CCU radio IP address and subnet mask
•
EUM Ethernet IP address and subnet mask
•
End-user PC Ethernet IP address and subnet mask
To set the EUM Ethernet IP address
1. Type ip ethernet <aaa.bbb.ccc.ddd> <net mask> and press Enter.
•
•
APCD-LM043-4.0
on page 53, you determined the following:
<aaa.bbb.ccc.ddd> is the CCU Ethernet IP address.
<net mask> is the net mask.
8 Configuring the EUM
99