Advpn Source-Port; Display Advpn Ipv6 Session - HP MSR Series Command Reference Manual

advpn source-port

Use advpn source-port to set the source UDP port number for ADVPN packets.
Use undo advpn source-port to restore the default.
Syntax
advpn source-port port-number
undo advpn source-port
Default
The source UDP port number is 18001.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
port-number: Specifies the UDP port number in the range of 1025 to 65535.
Usage guidelines
This command is available only when the tunnel mode is UDP.
If the vam client command configured on the tunnel interface has the compatible keyword, the tunnel
interface must have a different source UDP port number from other tunnel interfaces.
Examples
# Set the source UDP port number to 6000.
<Sysname> system-view
[Sysname] interface tunnel 1 mode advpn udp ipv4
[Sysname-Tunnel1] advpn source-port 6000
Related commands
vam client

display advpn ipv6 session

Use display advpn ipv6 session to display IPv6 ADVPN tunnel information.
Syntax
display advpn ipv6 session [ interface tunnel number [ private-address private-ipv6-address ] ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
529