HP MSR Series Command Reference Manual page 204

Global IP/port: 50.1.1.1/23-30
Local IP/port : 192.168.10.15-192.168.10.22/23
Global VPN : vpn1
Local VPN : vpn3
Config status : Inactive
Reasons for inactive status:
The following items don't exist or aren't effective: local VPN.
Interface: GigabitEthernet2/0/3
Protocol: 255(Reserved)
Global IP/port: 50.1.1.100/---
Local IP/port : 192.168.10.150/---
Global VPN : vpn2
Local VPN : vpn4
Config status : Inactive
Reasons for inactive status:
The following items don't exist or aren't effective: interface IP address.
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display NAT Server
configuration.
<Sysname> display nat server
NAT internal server information:
Totally 3 internal servers.
Interface: GigabitEthernet2/0/1
Protocol: 6(TCP)
Global IP/port: 50.1.1.1/23
Local IP/port : 192.168.10.15/23
Config status : Active
Global flow-table status: Active
Local flow-table status: Active
Interface: GigabitEthernet2/0/2
Protocol: 6(TCP)
Global IP/port: 50.1.1.1/23-30
Local IP/port : 192.168.10.15-192.168.10.22/23
Global VPN : vpn1
Local VPN : vpn3
Config status : Inactive
Reasons for inactive status:
The following items don't exist or aren't effective: local VPN.
Global flow-table status: Active
Local flow-table status: Active
Interface: GigabitEthernet2/0/3
Protocol: 255(Reserved)
Global IP/port: 50.1.1.100/---
Local IP/port : 192.168.10.150/---
Global VPN : vpn2
190