Reset Ipv6 Pathmtu - HP MSR Series Command Reference Manual

Predefined user roles
network-admin
Parameters
all: Clears static and dynamic neighbor information for all interfaces.
dynamic: Clears dynamic neighbor information for all interfaces.
interface interface-type interface-number: Clears dynamic neighbor information for the interface
specified by its type and number.
slot slot-number: Specifies a card by its slot number. If you do not specify a cad, this command clears
dynamic neighbor information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears dynamic neighbor information for all member devices. (Centralized devices
in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. If you do not specify a card, this command clears dynamic neighbor information
for all cards. (Distributed devices in IRF mode.)
static: Clears static neighbor information for all interfaces.
Usage guidelines
You can use the display ipv6 neighbors command to display IPv6 neighbor information.
Examples
# Clear neighbor information for all interfaces.
<Sysname> reset ipv6 neighbors all
This will delete all the entries. Continue? [Y/N]:Y
# Clear dynamic neighbor information for all interfaces.
<Sysname> reset ipv6 neighbors dynamic
This will delete all the dynamic entries. Continue? [Y/N]:Y
# Clear all neighbor information for GigabitEthernet 2/0/1.
<Sysname> reset ipv6 neighbors interface gigabitethernet 2/0/1
This will delete all the dynamic entries by the interface you specified. Contin
ue? [Y/N]:Y
Related commands
display ipv6 neighbors
•
ipv6 neighbor
•

reset ipv6 pathmtu

Use reset ipv6 pathmtu to clear the Path MTU information.
Syntax
reset ipv6 pathmtu { all | dynamic | static }
Views
User view
373