Temporary Address Range - HP MSR Series Command Reference Manual

<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] static-bind address 2001:0410::/35 duid 0003000100e0fc005552 iaid
A1A1A1A1
# In address pool 1, bind prefix 2001:0410::/35 to the client DUID 00030001CA0006A400 and IAID
A1A1A1A1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] static-bind prefix 2001:0410::/35 duid 00030001CA0006A400 iaid
A1A1A1A1
Related commands
display ipv6 dhcp pool

temporary address range

Use temporary address range to configure a temporary IPv6 address range in a DHCPv6 address pool
for dynamic allocation.
Use undo temporary address range to remove the temporary IPv6 address range from the DHCPv6
address pool.
Syntax
temporary address range start-ipv6-address end-ipv6-address [ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
undo temporary address range
Default
No temporary IPv6 address range is configured in a DHCPv6 address pool.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
start-ipv6-address: Specifies the start IPv6 address.
end-ipv6-address: Specifies the end IPv6 address.
preferred-lifetime preferred-lifetime: Sets the preferred lifetime. The value range is 60 to 4294967295
seconds, and the default is 604800 seconds (7 days).
valid-lifetime valid-lifetime: Sets the valid lifetime. The value range is 60 to 4294967295 seconds, and
the default is 2592000 seconds (30 days). The valid lifetime cannot be shorter than the preferred
lifetime.
Usage guidelines
If you do not execute the temporary address range command, the DHCPv6 server does not support
temporary address assignment.
You can configure only one temporary IPv6 address range in an address pool. If you use the command
multiple times, the most recent configuration takes effect.
414